Lian Li Lancool 215 Cabinet (Black)

Specifications

Model	LANCOOL 215
Dimensions	(D) 462mm x (W) 215mm x (H) 482mm
Motherboard	E-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU	210mm
Color	210mm
Materials	0.75mm SGCC (MB tray, and most of the interior) 4.0mm tempered glass (both sides)
Incl Fans	2 x 200MM 3-PIN 800 RPM ARGB fans (front) 1 X 120MM 3-PIN 1100 RPM Fans (rear)
Fan Support	Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm
Radiator	Front: 1 x 280/360mm Top: 1 x 240 / 280 mm
VGA Length	370mm
CPU Clearance	166mm
Drive	Behind MB Tray: 2 x 2.5″ SSD Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
Slot	7
I/O Ports	Power button Reset button LED button for lighting mode control 1 x HD AUDIO 2 x USB 3.0
Dust Filters	1 x Top (magnetic), 1 x Bottom (tray)
Warranty	1 Year

Features

OPTIMIZED THERMAL MANAGEMENT

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.

Included Fans

Pre-installed fans ensure the case runs at peak performance.

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.

STUNNING PC ILLUMINATION

Move air stylishly with ARGB effects

Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.

Highlighted logo

The LIAN LI logo glows in sync with the fans.

Experience ARGB control via one button

The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.

ARGB synchronization with the motherboard

Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.

Pre-installed fan hub

The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

Plenty of space for cable management

The 22MM thick space behind the motherboard ensures the cables fit in well.

Keep the cable nice and neat

The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.

E-ATX Motherboard Compatible

Fits motherboards with a maximum width of 280MM.

Removable/adjustable cage supports

2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD

SIMPLE DUST MANAGEMENT

The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.