Thermaltake VERSA J25 RGB

Specification

Model	Versa J25 TG RGB
P/N	CA-1L8-00M1WN-01
Case Type	Middle tower
Dimension (H x W x D)	461 x 206 x 402 mm(18.1 x 8.1 x 15.8 inch)
Net Weight	6.2 kg / 13.67 lb
Side Panel	4mm Tempered Glass x1
Color	Exterior & Interior : Black
Material	SPCC
Cooling System	Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA)
Drive Bays
Accessible	2 x 2.5”(HDD Bracket)
Hidden	3 x 3.5“ or 2.5” (HDD Tray)
Expansion Slots	7
Motherboards	6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
I/O Port	USB 3.0 x 2, HD Audio x 1
PSU	Standard PS2 PSU (optional)
Fan Support	Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm
Radiator Support	Front: 1 x 360mm Rear: 1 x 120mm
Clearance	CPU cooler height limitation: 160mm VGA length limitation: 330mm PSU length limitation: 160mm
Warranty	3 Years

Features

Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis

Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.

3 Built-in 120mm 12V RGB Fans

Versa J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software.

Built-in RGB Switch Board

Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.

Built-in PSU Cover

The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.

Tempered Glass Window

The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.

Tool-Free Installation

The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives.

Superior Hardware Support

Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.

Excellent Cooling Capability

The J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.

Angular, Acrylic Front Panel

The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.

Handy I/O Ports

The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.