Specification
PROCESSOR | Supports 8th Gen Intel® Core™, Pentium® Gold and Celeron® Processors for Socket LGA1151 |
CHIPSET | Intel® B360 Chipset |
MEMORY | 4 x DDR4 memory slots, support up to 64GB
Supports DDR4 2666/ 2400/ 2133 MHz1 Dual channel memory architecture Supports non-ECC UDIMM memorye Supports Intel® Extreme Memory Profile (XMP) |
SLOTS | 2 x PCIe 3.0 x16 slots (support x16/x4 modes)
4 x PCIe 3.0 x1 slots |
ONBOARD GRAPHICS | 1 x DisplayPort 1.2, supports a maximum resolution of 4096×2304 @ 60Hz
1 x DVI-D port, supports a maximum resolution of 1920×1200@60Hz |
STORAGE | Intel® B360 Chipset
5 x SATA 6Gb/s ports 1 x M.2 slots (Key M) Support up to PCIe 3.0 x4 and SATA 6Gb/s Supports 2242/ 2260 /2280/ 22110 storage devices Supports Intel® Optane™ Memory Ready |
USB | Intel® B360 Chipset
2 x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) ports (1 Type-A port and 1 Type-C port on the back panel) 4 x USB 3.1 Gen1 (SuperSpeed USB) ports (2 ports on the back panel, 2 ports available through the internal USB connectors) 6 x USB 2.0 (High-speed USB) ports (2 Type-A ports on the back panel, 4 ports available through the internal USB connectors) |
AUDIO | Dual Realtek® ALC892 Codec
7.1-Channel High Definition Audio |
LAN | 1 x Intel I219-V Gigabit LAN controller |
INTERNAL CONNECTORS | 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector 1 x 6-pin ATX PCIe power connector 5 x SATA 6Gb/s connectors 1 x USB 3.1 Gen1 connectors (supports additional 2 USB 3.1 Gen1 ports) 2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports) 1 x 4-pin CPU fan connector 1 x 4-pin water pump fan connector 5 x 4-pin system fan connectors 1 x Front panel audio connector 2 x Front panel connectors 1 x Series port connector 1 x Parallel port connector 1 x 5050 RGB LED strip 12V connector 1 x TPM module connector 1 x Thunderbolt Add-on Card Connector 1 x Chassis Intrusion connector 1 x Clear CMOS jumper |
BACK PANEL PORTS | PS/2 Combo Port
LAN Port HD Audio Connectors USB 2.0 Port DVI-D DisplayPort USB 3.1 Gen2 Type A + C USB 3.1 Gen1 |
DIMENSIONS | 12 in. x 9.6 in. (30.4 cm x 24.3 cm)
ATX Form Factor |
MOUNTING | 9 mounting holes |
WARRANTY | 3 Years |